|
|
Post by dsaitta on Jul 23, 2009 11:43:59 GMT -5
Have any of you tried the Weber Work Table 7412? Does it prevent the lid from making a tight seal?
|
|
|
|
Post by huskerque on Jul 23, 2009 12:09:11 GMT -5
My brother has tried this and the results were less than desirable. It leaves too much of a gap and the lid doesn't seal properly.
|
|
|
|
Post by slider6 on Jul 26, 2009 9:59:00 GMT -5
I have the lid hanger and those shelves that mount to the side. The wrap around brackets do make it so the lid doesn't seal 100%, but I don't see why that's a problem. There seems to be huge concern here about that lid fitting 100 percent air tight. I don't see the importance. I have carbon steel smokers and none of them have doors or lids that seal 100%. It's still tight enough to close the vents and within minutes the coals go out when I'm done cooking.
|
|
|
|
Post by vermin99 on Jul 30, 2009 16:37:28 GMT -5
I have the work table and love it. I removed it the first time I used my Smokenator in my kettle but decided to keep the table on the second time I used it. I used the same technique I figured out the first time I used the Smokenator to control temps and got the same results.
|
|
